EGT-80

(image for) Drive Belt (regular)

Drive Belt (regular)

Oil, heat and abrasion resistant V-belt, sized to fit stock tractors models E8, E10, EGT-80 and EGT-100. If the optional speed reduction kit is...
$9.50

Add:

(image for) Drive Belt (reduced speed)

Drive Belt (reduced speed)

Oil, heat and abrasion resistant V-belt, sized to fit models E8, E10, EGT-80 and EGT-100 with the optional speed reduction kit installed . For stock...
$9.50

Add:

(image for) Charger Capacitor - 2 mfd

Charger Capacitor - 2 mfd

Replacement 2 uf capacitor. Fits E8, EGT-80. ER8-36. As chargers have often been swapped between tractors over the years, it is important to check...
$8.80

Add:

(image for) Charger Diodes (set of 2)

Charger Diodes (set of 2)

Press-in diode for charger heat-sink/diode assembly. Two versions available (select below): Regular version has a wire lead and same current ratings...
$12.00

... more info

(image for) PTO receptacle

PTO receptacle

Replacement 3-prong PTO receptacle. Fits B-145, C-185, E12, E12M, E12S, E14, E15, E16, E20, EGT-120, EGT-150, EGT-200 and I-5 models. Mounts in...
$6.00

Add:

(image for) Brake/Clutch Switch

Brake/Clutch Switch

Brake switch, 2-7/8" spring-loaded actuator lever. Includes stainless steel mounting hardware. Fits B-145, C-185, E8*, E10*, EGT-80*, EGT-100*, E12,...
$19.80

Add:

(image for) PTO switch (3 position)

PTO switch (3 position)

3-position PTO switch: off, on, and start (momentary) mounted in dash to control the mower deck or other accessory. Fits E8, E10, EGT-80, EGT-100 and...
$13.80

Add:

(image for) Key switch (plastic insert)

Key switch (plastic insert)

New old stock key switch. Metal with plastic insert, mounts in a 13/16" hole. Includes one key. Used in GE models E8, E10, E14, E15(HA-JA only), E16,...
$24.00

Add:

(image for) Fusible Link for OEM Disconnect Switch

Fusible Link for OEM Disconnect Switch

Fusible link for use with OEM style main power disconnect switch on all large frame models. Fits OEM disconnect switches as used in B-145, C-185,...
$3.00

Add:

(image for) Steering bearing, 5/8", metal insert

Steering bearing, 5/8", metal insert

Steering bushing/bearing with two-hole flange and METAL insert. Fits small frame tractors and large frame tractors with 5/8" steering shaft. Part...
$9.80

Add:

(image for) Rear wheel: rim & hub kit upgrade (narrow)

Rear wheel: rim & hub kit upgrade (narrow)

More arriving approximately March 25, 2023. Replace the original rear wheel with this 2-piece kit. Be sure to order two kits if planning to replace...
$122.00

Add:

(image for) Mower Deck Fiber Washers (set of 2)

Mower Deck Fiber Washers (set of 2)

Fiber washer - use in pairs when installing blades. Fits all B-145, C-185, E12, E12M, E12S, E14, E15, E16, E20, EGT-120, EGT-150, EGT-200, I-2 and...
$3.50

Add:

(image for) Lift Cable

Lift Cable

Lift cable, stranded galvanized steel. For mid-mount decks. Part numbers 120213, 244A7185P1, 519376.
$9.80

Add:

(image for) Mower deck decal - Guard removal caution

Mower deck decal - Guard removal caution

Decal for mowing decks: CAUTION Guards are for your protection do not remove Part numbers 120525, 211A3514P1, 517657.
$3.80

Add:

(image for) Motor brush set - dual shunt

Motor brush set - dual shunt

Brush set for permanent magnet drive motors and heavy duty large diameter mowing deck motors. Dual shunt leads, open flag terminal. Set of 2. Fits...
$24.00

Add:

All Content Copyright © 2007-2024
Free Range Electric, LLC
Waynesboro, VA 22980